Visio by DPTPB: 22.11.2016 Update Notes

Updated cable end shapes for SAS 6Gbps and ACP cable shapes

First iteration of transitional SAS cable Visio shapes looked odd to me, one end of the cable contained “12G” speed indication, while the other one was just empty shape without additional information, so I’ve changed the older cable end shapes to contain speed indication as well “6G”. This led to need for updated cable ends for older SAS 6Gbps cables as well.

Continue reading “Visio by DPTPB: 22.11.2016 Update Notes”

Advertisements

Visio by DPTPB: Not Running Cables in Drawings?

screen-shot-2016-11-16-at-08-27-58

Screenshot: Cabling for NetApp FAS8080EX HA-pair with eight SAS-stacks, multiple links to different networks

As seen in example above running and routing cabling can be quite complex and is definitely the most time-consuming part of drawing process. Additionally in big drawings some areas can get really “busy” with lots of cabling and make the drawing to hard read.

Examples of such busy areas would be switches, like Cluster Interconnect and/or Front-End 10GbE switches. Other example would be High-End Storage controllers with many PCI slots filled with even more ports.

So how about leaving the cables out?

For documentation purposes you could use just port assignment boxes. Fill in correct port information into the boxes, skip cabling all together and you are done.

Or are you?

Continue reading “Visio by DPTPB: Not Running Cables in Drawings?”

Visio by DPTPB: Transitional SAS cables, QSFP to Mini-SAS HD

 

Older generation SAS 6Gbps ports use QSFP form factor connector  while newer generation SAS 12Gbps ports use smaller Mini-SAS HD form factor connector (at least with NetApp gear). These form factors are not compatible, i.e you cannot cable QSFP connector to Mini-SAS HD port or vice-versa.

To make things more confusing, there are also 12Gbps capable ports that are using QSFP form factor connector. In case of NetApp, X2069-R6 adapter is example of such combination.

Continue reading “Visio by DPTPB: Transitional SAS cables, QSFP to Mini-SAS HD”

NetApp Ontap 9.1 HW refresh: Faster ports and more ports

NetApp announced hardware refresh recently, basically renewing all current FAS / AFF controller models.  This time I will investigate network connectivity and more so port counts rather than port speeds.

Continue reading “NetApp Ontap 9.1 HW refresh: Faster ports and more ports”